Genie Telehandler Tires in Mud

Choosing the Right Tires for Your Telehandler

 

While tires are probably not the first thing you think about when spec’ing a telehandler, you should spend a few minutes thinking through your options to ensure you get the right type for your needs. Tires will impact your telehandler’s reliability, the total cost of ownership and will affect your job site performance and ride comfort.

Here’s a brief overview of what you need to consider when selecting the right tires for your telehandler.

 

Options

Manufacturers typically offer three options for telehandler tires: Air-filled pneumatic tires, foam-filled pneumatic tires and solid tires. Each option has its own advantages and disadvantages when it comes to the overall performance and the total cost of ownership.

 

Air-filled pneumatic tires

As the least expensive telehandler tire option, air-filled pneumatic tires are the lightest and provide the best overall floatation when working in soft ground conditions. They will also provide the operator with the best overall ride comfort.

However, those qualities do come at a cost, especially when working at sites with a lot of construction debris like nails, screws, rebar and other material that could puncture the tire.

 

Foam-filled pneumatic tires

Foam can be added to a pneumatic tire anytime during the life of a set of tires. Generally foam-filled tires perform better on rough, unimproved terrain because of the added weight. Flotation in soft ground conditions will be affected due to the additional weight to the machine. The chance of getting a flat tire on the job is greatly reduced, but keep in mind, foam-filled tires are still susceptible to damage including sidewall damage. Also, most tire experts will agree that foam fill is hard on tires and can cause them to wear out faster so it’s important to monitor the wear and tear during its life.

You can expect to pay between 1-1/2 to 2 times more for foam-filled tires than you would for air-filled tires.

 

Solid tires

Solid rubber tires are growing in popularity. They last anywhere from 4-8 times as long as a pneumatic tire, and they make downtime caused by a flat tire a thing of the past. This makes them an ideal fit for building sites with a lot of construction debris. However, the tradeoff is that solid tires are more rigid than foam- or air-filled tires, which will impact the ride comfort for the operator. Also, the added weight of the rubber will adversely affect a telehandler’s floatation in soft ground conditions.

You can expect to pay around 2-3 times more than what you would pay for four air-filled tires.

 

The choice is yours

Before you decide what type of tires are the right set for you, review the type of job sites your telehandlers are working on and determine how frequently flat tires have been an issue in the past.

Content provided by Genie, a Terex brand.