Toyota Center-Controlled Rider Pallet Jack

6,000 lbs - 8,000 lbs Capacity /

New Toyota Center Controlled Rider at Conger

Just get in and go. With easy maneuverability and a comfortable mid-truck operator compartment, the Toyota Center-Controlled Rider Pallet Jack makes cross-warehouse hauling fast and efficient. It doubles as a low-level order picker, too. Giving you complete command of your ground game and a healthy boost in productivity, shift after shift.

Dual lift cylinders provide efficient hydraulic power for smooth, effortless lifting to reduce component wear. Solid steel pull rods add strength throughout the entire length of the forks, and are much less likely to bend or flex than push rods, resulting in less maintenance. When repairs come up, the self-diagnostics simplify troubleshooting and eliminate the need for an external hand-held analyzer.

Rent this pallet jack.

Quick Spec Chart
MODEL LOAD CAPACITY* (LBS) VOLTAGE (V) MAXIMUM TRAVEL SPEED FULL LOAD (MPH) RIGHT ANGLE** STACK (48” FORKS 48” W PALLET)
Center-Controlled Rider Pallet Jack 8HBC30 6,000 24 6.2 98.8
8HBC40 8,000 24 6.2 141.3***

* BASED ON 24” LOAD CENTER.

** ADD LOAD CLEARANCE.

*** 84” FORK LENGTH.

 

Advantages
  • Multi Function Control Handle with ergonomically positioned handgrips; dual thumbwheels; and lift, lower and horn buttons for simplifi ed operation of all controls with either hand
  • High-Speed Interlock to maintain top travel speed for long-distance transport without continuously pressing a button
  • Box Rail Fork Construction provides torsional rigidity and maximum strength to prevent premature fatigue
  • Solid Steel Pull Rods add strength throughout the entire length of forks, and are much less likely to bend or flex than push rods, resulting in less maintenance
  • Dual Lift Cylinders provide efficient hydraulic power for smooth, effortless lifting to reduce component wear
  • Self-Diagnostics simplify troubleshooting and eliminate the need for an external hand-held analyzer
  • Glance and Go Display provides a quick summary of key information
  • Cushioned Stability Handrail offers convenient control during high-speed travel
  • Electronic Coast Control Option augments productivity by eliminating the need for operator to climb on and off during floor-level order picking
Standard Features

Performance

  • AC drive motor with thermal protection & current limiting
  • 24-Volt electrical system
  • 6” lift
  • Programmable performance
    • Adjustable maximum speed
    • Adjustable acceleration
  • Fault code memory with hour meter reading
  • Regenerative braking
  • On/off key switch
  • Lift limit switch
  • Multiple hour meter indicator
  • Battery discharge indicator with lift interrupt
  • Fused control & power circuits
  • Hydraulic overload protection valve
  • Dual 1.25”-diameter lift cylinders
  • Polyurethane torsion block stabilizing casters
  • Heavy-duty spring-loaded stabilizing casters

Body/Exterior Design

  • 31.5”-long x 13.44” wide battery compartment
  • SB-175 battery connector (gray)
  • Cold storage conditioning

Ergonomics

  • Multifunction control handle with ergonomically angled handgrips & wrap-around hand guard
  • Dual thumbwheels with twist grips for directional control & travel speed
  • Intuitively positioned lift/lower buttons
  • Adjustable height control handle (3-position); dual hand brake levers
  • Low-effort control handle
  • High-speed interlock button
  • Bubble-cushioned operator floor mat, padded backrest & knee pad
  • Walk-through operator compartment
  • Low platform step height

Durability

  • Control Area Network (CAN-bus) communications
  • Welded construction with reinforced heavy-duty bumper
  • Powder coat paint finish
  • Box rail fork construction
  • Steel bulkhead wrappers
  • Forged rectangular steel tension rods
  • Heavy-duty bushing & pins
  • Solid trial fork casting
  • Tapered fork tips with pallet entry sides
  • Four-point lift linkage
  • High-strength polymer service cover
  • Rubber drive tire
  • Hall-effect switches
  • 48” load backrest extension

Serviceability

  • AC drive motor ( no brushes or commutator)
  • Self-adjusting electric disc brake
  • One-piece, lightweight service access cover
  • Error indicator with self-diagnostics
  • Teflon®-coated Polylube™ lift linkage bushing (maintenance free)

Safety

  • Wrap-around hand guard
  • Control handle with dual brake levers
  • Electronic horn

Download Full Brochure and Specifications


Get a Quote

Get a Quote for Toyota Center-Controlled Rider Pallet Jack