Toyota Counter-Balanced Stacker

2,000 - 4,000 lbs Capacity /

New Toyota Counter Balanced Stacker from Conger

Loads too wide for other stackers in aisles too tight for sit-down forklifts. That’s the Toyota Counter-Balanced Stacker’s sweet spot. Makes sense, given that it’s only 34.1 inches wide. Makes even more sense when you factor in a lift height of up to 180 inches, and an ability to store and stack loads weighing up to 4,000 pounds. At which point adding the Counter-Balanced Stacker to your fleet as an ideal indoor utility player makes perfect sense.

Not available for rent. View our rental equipment.

Quick Spec Chart
MODEL LOAD CAPACITY* (LBS) VOLTAGE (V) BASELEGS OPENING I.D. (IN) MAX. TRAVEL SPEED FULL LOAD (MPH) MAX. LIFT SPEED FULL LOAD (FPM) MAX. LOWER SPEED FULL LOAD (FPM) BASIC RIGHT ANGLE STACK** (IN)
Counter-Balanced Stacker 6BWC10 2,000 24 2.9 37 60 111
6BWC15 3,000 24 3.0 32 60 116
6BWC20 4,000 24 2.8 27 60 122

* BASED ON 24” LOAD CENTER.

** BASED ON 48” L x 40” W PALLET. ADD LOAD CLEARANCE.

Advantages
  • Drive-In Pallet Access accelerates cycle times and improves overall productivity
  • Load-Sensing Torsion Bar for easier steering and reduced operator fatigue
  • Handle-Mounted Electric Lift/Lower Controls for easy access, with pressure compensated valve for constant lowering in all conditions
  • Large Ergonomic Dual Thumbwheels for easy thumb activation of all controls with leak-proof cast iron pump body
  • High-Visibility Mast allows operator to clearly see fork tips and wider work area
  • No Tools Required Service Door for easy access to all major components for inspection and maintenance
Standard Features

Performance

  • 24-Volt electrical system
  • SB-175 connector (red)
  • On/off key switch
  • UL-approved model type “E”
  • Electric raise & lower controls in operator handle
  • Manual raise & lower controls on console
  • MOSFET programmable controller with Separately Excited (SepEX™) shunt wound drive motor & self-diagnostics

Body/Exterior Design

  • Electric horn
  • 30”-wide ITA Class II hook-type carriage
  • 42”-long pallet forks
  • 48”-high load backrest extension
  • Mast tilt (3° forward/8° backward)
  • High-visibility mast
  • 10”-diameter x 4”-wide rubber drive tire
  • 10.5”-diameter x 5”-wide polyurethane load wheels
  • 32.3” x 13.3” open height battery compartment
  • Stabilizing casters
  • Spring-loaded torsion bar suspension with automatic load sensing
  • Pressure overload relief valve & lowering control fuses
  • Easy access service cover

Operability & Ergonomics

  • Emergency power disconnect switch
  • Automatic resetting circuit breaker
  • Reverse polarity protection contactor
  • Mechanical drum brake
  • Directional thumb control
  • Direction reverse switch in control handle
  • Power on self-test

Download Full Brochure and Specifications


Get a Quote

Get a Quote for Toyota Counter-Balanced Stacker