Toyota High-Capacity Marina Forklift

55,000 lbs Capacity /

Toyota High-Capacity Marina Forklift

The Toyota High-Capacity line is synonymous with strength and durability, and the High-Capacity Marina Forklift is no exception. We know you’re handling precious cargo. That’s why this forklift comes standard with what you’ll need to ensure superior performance and reliability.

Ready to take on the toughest challenges at your boatyard or marina, the Toyota High-Capacity Marina Forklift boasts a 100% welded steel chassis with steel cross supports. And our AxleTech planetary drive axle with force-cooled wet disc brakes is designed for maximum durability in high-capacity applications. Even the paint is tough. A three-step paint process provides maximum corrosion protection perfectly suited for wet marina applications.

See all forklift makes and models.

Quick Spec Chart
  • Lift Capacity: 15,000 – 55,000 lbs
  • Wheelbase: 94 in – 170 in
  • Load Center: 96 in
Advantages
  • CUMMINS 6.7L, 6-CYLINDER DIESEL ENGINE powers the heaviest applications while meeting increasingly tough emission standards.
  • AXLETECH HEAVY-DUTY FRONT AXLE for maximum durability in high-capacity applications.
  • SPECIALLY DESIGNED MAST negative lift to pull boats out of a lower marina slip.
  • ELECTRONIC JOYSTICK CONTROLS are highly intuitive and ergonomically designed to increase comfort and productivity.
  • SWING-STYLE FORK CARRIAGE dependent and independent fork control for precise load handling.
  • MD4 7” TOUCH-SCREEN DISPLAY for customizable performance, advanced diagnostics, and pertinent forklift information right at your fingertips.
Features

Safety

  • Electrical horn
  • Asbestos free components
  • Spring-applied/hydraulic release parking brake
  • Operator Restraint System seat
  • Operator Presence Sensing System (OPSS)

Performance

  • Cummins Tier 4 Final 6.7L Diesel Engine
  • Dana 32000 powershift transmission
    – 3FWD/3REV gears
    – Dedicated cooling system
    – 12 plate modulation
  • Declutch control pedal
  • Swing-style fork carriage (independent and dependent)
  • Interactive CANBUS vehicle management system
  • 7” touch-screen multi-function display
    – Fuel gauge
    – Hour meter
    – Tachometer
    – Water temperature gauge
    – Estimated rack height calculator
    – Engine oil pressure
    – Parking brake indicator
    – Estimated load weight indicator
    – Service and operator manuals
    – Pre-operation checklist (upon request)1
    – Fuse/relay diagnostics
  • Electronic engine diagnostics with fault code history
  • Bolted open core radiator with high-capacity cooling system
  • External sump tank provides additional cooling
  • 100 amp alternator with built-in regulator

Durability

  • Axletech heavy-duty planetary drive axle rated for durability in high-capacity applications
  • Force-cooled wet disc brakes
  • Galvanized forks and carriage for ultimate corrosion protection
  • Two-part rust-inhibiting polyurethane base coat and two-part polyurethane top coat for corrosion protection
  • Rubber fork covering system
  • Algae filtration system
  • Carriage wear blocks
  • Heavy-duty, isolated drive line mounts
  • Two easily accessible 12V industrial batteries
  • Anti-restart ignition switch
  • Welded steel chassis with heavy-duty cross supports
  • Dual action bolt-on cylinder protected by heavy steel support beams
  • High-impact composite trunions
  • Sealed, tapered roller bearings
  • Forged steer knuckle
  • Oversized steer linkage
  • Stainless steel hydraulic bulkhead fittings (carriage and mast)
  • Stainless steel, corrosion resistant rods, ends, and pins on swing cylinders
  • Lubricated mast rollers
  • Long life, corrosion resistant wear pads
  • Rubber fork covering system

Ergonomics

  • Electronic joystick controls
  • Air-ride seat
  • Low-profile counterweight
  • Tilt steering column
  • Left hand shift lever on steering column
  • Two-stage, wide-view mast
  • Low-height, non-skid steps with operator handrails
  • Splash guard in front of operator platform
  • Rear collision sensor w/ visual and audible warning
  • Overhead mounted tilt cylinders
  • Lift circuit accumulator
  • LED headlights
  • Rear LED work lights
  • Rear LED combo lights

Serviceability

  • Lubricated, sealed, and greasable main rollers on each side of the mast
  • O-ring face seal fittings on entire system to prevent oil leaks
  • Tilt-lock valve with counterbalance to prevent mast drift
  • Large, bolt-on fuel and hydraulic tank
  • Easy-access filters
  • Low chassis side plates provide easy drive train access
  • Hydraulic multi-gauge
  • Integrated lift points
  • Wet disc brakes serviceable through wheel ends
  • Easy-access lubrication points

Download Full Brochure and Specifications


Get a Quote

Get a Quote for Toyota High-Capacity Marina Forklift