Hoist FKS Series Forklift

Name: Hoist FKS Series Forklift
Brand: Hoist
Availability: InStock

$0.00

23,000 lb. – 100,000 lb. Capacity

Power: LPG
Wheelbase: 90 – 125 in.
Load Center: 24 – 36 in.

The FKS Series forklift is a heavy-duty cushion-tire lift with the power to lift loads up to 100,000 pounds, but compact enough to maneuver in tight areas. You can expect increased operator comfort and an innovative design using the latest technology.

Offering the ultimate combination of strength, maneuverability and comfort, the Hoist FKS Series Forklift is ready for the harshest indoor conditions you can throw at it. These durable, cushion tire forklifts can be configured with a variety of mast and attachment options.

Additional Information

Forklift Type	Internal Combustion – Cushion Tire

Standard two-stage, high-visibility mast, low-profile carriage and short counterweight to provide the operator with unobstructed views in all directions
Powered by a standard GM 5.7L V8 LPG engine, three-speed automatic powershift Dana transmission and load sensing hydraulic system, which offer not only power, but also increased productivity and fuel efficiency
Full rated capacity even if you add a feature such as a side-shifting fork positioner
Innovative hydraulic multi-gauge provides quick and easy pressure readings with a simple twist of the dial, eliminating the need to tap into individual hydraulic lines

Electronic engine diagnostics with fault code history
Built-in engine protection system
Two-stage heavy-duty air cleaner with electronic restriction indicator
Heavy-duty isolated anti-vibration bolt-in drive line mounts
Inboard muffler with optional purifier
100-amp alternator with built-in regulator (amps vary with capacity)
Dana 32,000 three-speed automatic powershift transmission
Automatic transmission prevents shifting until travel speed is less than 1mph
12-plate modulation for smooth shifting and added durability
Load-sensing hydraulic system with variable pumps adjust oil flow accordingly to provide quicker lifting cycles while also reducing fuel consumption
Integral safety function prevents engine stalling when hydraulic system is dead-heading
O-ring face seal fittings on entire system prevent oil leaks
Tilt-lock valve with counterbalance to prevent mast drift
Large clean-out covers on top for easy access and convenient drain plug on bottom
Filters are easily accessible for quick replacement
Hydraulic multi-gauge provides quick and easy pressure readings with a twist of the dial; eliminates the need to tap into hydraulic lines
Standard 12-volt electrical system
Color-coded electrical wires enclosed with split-tubing wire loom wrap using sealed weather pack connectors
Electrical system controls LED headlights, tail lights, turn signals, backup lights, marker lights, brake lights and LED amber strobe light; lights are completely sealed and last approximately 10,000 hours

Meets ANSI B56.1 FOPS operator protection
Overhead guard provides safety without obstructing views
Low, non-skid steps for safe and easy entry/exit
Finger-tip hydraulic levers require minimum effort
Tilt-steering column with directional/gear-shift lever
Dual brake pedal and inching control
Spring-apply/hydraulic-release parking brake
Gauges and auxiliary controls on front console for easy viewing and access
Emergency stop button
Adjustable semi-suspension seat and retractable seat belts

Pin-mount, machine-contoured forks (high or low position)
Welded-nested channels with lift cylinders secured directly behind mast rails
Lift chain and optional attachment hosing located inside inner mast rail
Main and side thrust rollers are impact-resistant and designed to reduce friction; rollers are properly lubricated and sealed
Greaseable mast pivots constructed with wear-resistant bronze bushings and hardened steel pins
Safety valves built into base of lift cylinders for controlled lowering in the event of a hose failure
Chrome-plated rods on cylinders for easy seal replacement