CLARK Core IC Pneumatic Forklift

3,000 – 7,000 lb. Capacity
LPG, Dual Fuel, and Diesel Power Sources
One-Piece Heavy Duty Steel Frame
Password Protected Engine Start Through Dash

Documents

Product Documents

Financing Information

Forklift Leasing: The Ultimate Guide

Forklift Information

Product Description

Take on the most demanding jobs in harsh, heavy conditions with the CLARK Core IC Pneumatic forklift. With a variety of powerful LPG, dual fuel, and diesel engines and combined with a rugged frame, you’ll be ready to get stuff done.

Model Numbers: C15 | C18 | C20s | S20D | S25D | S30D | S35D | S20L | S25L | S30L | S35L | GTS20L | GTS25L | GTS30L | GTS33L

Equipment Details

Forklift Type	Internal Combustion – Pneumatic Tire
Brand	CLARK
Capacity	3,500 lbs., 3,000 lbs., 4,000 lbs., 5,000 lbs., 6,000 lbs., 6,600 lbs., 7,000 lbs.
Condition	New
Fuel Type	Diesel, Duel Fuel, Gas & LPG, LPG

Rugged built with heavy duty one-piece frame and “Double Shear” steer axle designed to resist impacts
Superior longevity with advanced microprocessor and LED display monitors that monitor and alert you to any issues
Excellent operator ergonomics with fully adjustable suspension seat, tilting steering column, and ergonomically-mounted hydraulic controls
Low cost of ownership with 500-hour oil service interval on Ford and Isuzu engines, and 2,000-hour oil service interval on transmission
Reduced fuel consumption with superior engine efficiency and optimized hydraulic operating pressure

Optional fully adjustable, full suspension seat molded for support with non-cinching, retractable seat belt
Tilt steering column adjusts to suit operator and provides easier entry/exit
Cowl- or hood-mounted hydraulic control levers with low input force located and sized for ease of use
Thick molded floor mat reduces vibration and noise level to improve operator comfort
Minimal vibration and noise to the operator via a balanced engine and isolated transmission
Large floor board improves leg room and boot clearance
Small diameter steering wheel with low steering effort
Reduced brake and inching pedal effort
Optimized step height
Drink holder
Convenience console
Power steering

Hyundai Theta LPG engine (C15/18/20s Series)
- 4-cylinder, dual overhead cam engine
- Produces 52 HP and 114 ft-lbs of torque @ 1500 rpm
- Internal, self-lubricating chain-driven cams and automatic chain tensioner provide long-life and protection from debris
- Raised air intake
- High capacity cooling system
4TNV88 Yanmar diesel engine (C15/18/20s Series)
- EPA-compliant
- Standard vertical exhaust
- Durable, easy to start, easy to service, excellent fuel economy
Ford 2.5L LPG Tier-4 engine (S20/25/30/35 Series)
- Balanced engine
- 4-cylinder dual overhead cam design
- VVT (Variable Valve Timing)
- Sequential multi-port fuel injection
- Timing chain-driven camshaft
- Automatic belt tensioners
Isuzu 4LE2X 2.2L diesel Tier-4 engine (S20/25/30/35 Series)
- Turbo-charged
- High-pressure multi-stage injection
- DOC (Diesel Oxidation Catalyst)
- No regeneration (burn-off) cycles necessary
- No UREA additives
PSI 2.4L balanced engine (GTS20/25/30/33 Series)
- EPA-compliant LPG fuel system
- Single speed powershift transmission
Hydraulic System
- Hydraulic system uses load-sensing flow control valve to reduce heat build-up for maximum horsepower
- Main hydraulic valve incorporates adjustable flow controls for tilt and auxiliary functions for optimum performance of attachments
- Sectional design of hydraulic valve allows for easy addition of extra functions
- Upright mounted load lowering valve controls lowering independent of engine speed
- Hood mounted control levers for ease-of-use
Braking and Steering
- Force-cooled wet disc brakes for less pedal effort
- Automatically-applied parking brake
- Power steering
Upright
- Standard, Triple and Hi-Lo Uprights and Quad uprights
- Full range of lift heights
- Nested mast I-channel allows space for cylinders, hoses, and chains without sacrificing visibility
- Carriage has 6 shimmable, sealed, and canted rollers to maximize load distribution and reduce free play
- Hydraulic cushion valves allow for silent staging to reduce shock and vibration

Sectional design of hydraulic valve simplifies service
Microprocessor monitors the lift truck’s condition and controls function of truck systems
Separate transmission and axle simplify servicing
5″ smart LCD dash with LED lights features:
- On-board diagnostics
- Hour meter and maintenance intervals
- Transmission temperature
- Engine oil pressure
- Alternator charge
- Fuel system malfunction
- Park brake applied
- Maintenance required
- Seat belt

Designed with optimal center-of-gravity to enhance truck stability
Automatically applied parking brake
Rear handle with horn button
Static vinyl safety seat
High-visibility orange seat belt
Traction disable seat switch
Operator presence system
Automatic engine shutdown system
Speed limit control
Optional rear-view camera
Overhead guard mounted LED headlights

Heavy duty, welded & formed one piece steel frame protects from impact damage and extends the life of the truck
Integral hydraulic sump, with remote breather provides cooling for hydraulics in tough applications
Rugged “Double Shear” steering axle design withstands impact without loosening or breaking
High capacity cooling system

Manufacturing
Warehousing
Recycling
Beverage/Bottling
Trucking
Building Materials Handling
Distribution