AXCS Pro Series Scissor Lift

Up to 800 lb. Platform Capacity
16 – 25 ft. Maximum Working Height
30 in. Extension Deck Length
30% Gradeability with 8 in. Turn Radius
Electric Drive & Steer with Non-Marking Tires

Documents

Product Documents

Product Options

Hy-Brid Pro Series scissor lifts deliver the reach and platform space of a full-sized lift in a lightweight, compact design built for real-world job sites. With working heights up to 25 feet and lift capacities up to 800 lbs, these units give crews the power to work safely and efficiently indoors or out.

They’re easy to maneuver in tight spaces, roll smoothly on non-marking tires, and fit through standard doorways without folding rails. Proportional controls, electric drive and steer, and an intelligent control system make operation intuitive for any user. And with rugged construction, built-in safety systems, and low maintenance needs, these lifts are built to keep your team productive with less downtime.

Models: PS-1030 | PS-1430 | PS-1930

Additional Information

Brand	AXCS
Condition	New
Power	Electric
Working Height	10 – 19 ft., 20 – 29 ft.
MEWP Type	Scissor Lift

Compact size fits through standard doorways and elevators without folding rails.
Lightweight design delivers the lowest floor load pressures in the industry.
High lift capacities (up to 800 lbs) allow more tools and materials per trip.
LeakGuard™ ready design helps meet environmental regulations on job sites.
Electric drive and steer systems provide smooth, maintenance-friendly operation.

Proportional controls for precise movement.
Electric drive and steer functionality.
110V-AC power to platform.
Indoor/outdoor operation settings.
Maintenance charger and intelligent control system.
Manual descent pull cable for emergency lowering.
Dual maintenance locks and pothole protection.
Active load-sensing and tilt alarm systems.
Forklift pockets and 8-inch inside turn radius.
EZ-Glide slide-out extension deck (30″).
No folding rails for door-ready clearance.
Solid rubber, non-marking wheels.
30% gradeability for ramp navigation.
2-year parts & labor / 5-year structural warranty.

LeakGuard™ fluid containment system.
Pipe rack for transporting conduit or tubing.
Confined access modifications for tight working spaces.
Choice of lithium or AGM battery upgrades.
Perimeter lights and flashing beacon for visibility.
All motion alarm for additional safety awareness.
Onboard inverter for AC power tools.

Low platform entry heights reduce operator fatigue.
Spacious platforms with slide-out extension for extra work area.
Stowed height allows entry through standard doors without disassembly.
Intuitive control layout with proportional lift and drive response.

Active load-sensing prevents unsafe overload operation.
Tilt alarm and slope sensors protect against unstable usage.
Dual maintenance locks engage from outside the scissor stack.
Manual emergency descent cable for controlled lowering during faults.
Optional motion alarms and lighting improve jobsite visibility.

Working heights: 16 ft (PS-1030), 20 ft (PS-1430), 25 ft (PS-1930).
Platform capacities up to 800 lbs with 250 lbs on extension deck.
Drive speeds up to 2.4 mph (lowered), 0.6–0.7 mph (elevated).
30% gradeability for ramp and slope access.
8 in. inside turn radius for tight indoor maneuverability.

LeakGuard™ system reduces spill cleanup and maintenance requirements.
Onboard diagnostics and intelligent control system for troubleshooting.
Slide-out trays and accessible design simplify service access.
Solid, non-marking tires eliminate flats and surface damage.

Commercial construction
Facility maintenance
Retail and grocery store installation
Healthcare and education facilities
Electrical, HVAC, and mechanical contractors