Conger Industries Inc. - Wisconsin's Material Handling Experts

We help businesses move material at peak efficiency with the right equipment & solutions

You are here: Home / Equipment / Forklift Attachments / Cascade J-Series Recycling Clamps
Cascade J-Series Recycling Clamps
Recycle 120G_140G_0
RecycleClamp-App1_1100x652
RecycleClamp-App3
RecycleClamp-App2

Cascade J-Series Recycling Clamps

  • 3,500-11,000 lb capacity
  • Class II, III and IV mounting
  • 16.9-123.3 in. nominal opening range
  • 41-81 in. frame width
  • 32.4-36.4 in. hook spread

 

Request a Quote

Documents

Product Documents

Videos

Attachment Resources

Cascade J-Series Recycling Clamps are built for demanding operations where debris, impact and frequent ground contact can shorten attachment life. The range includes Class II, III and IV models with capacities from 3,500 to 11,000 lb and nominal opening ranges reaching 123.3 inches. Full-width wear bars, integral arm castings, protected hydraulics and lubrication-free UHMW bearings help the attachment withstand harsh recycling environments. High- and low-pressure configurations, multiple arm facings and several mounting arrangements allow the clamp to be matched to the truck and application.

Model Numbers: 18J | 22J | 26J | 40J | 53J | 67J

  • Rugged construction supports demanding recycling applications where debris, impact and ground contact can accelerate attachment wear.
  • Full-width alloy-steel wear bars protect the frame when scraping along the ground.
  • Integral arm castings and high-strength steel components provide added strength in high-cycle operations.
  • Open-frame design provides clear visibility through the attachment.
  • Available capacities range from 3,500 to 11,000 lb across the 18J through 67J model families.
  • Lubrication-free, full-length UHMW bearings backed by a 10,000-hour warranty.
  • Flow divider promotes equal arm movement.
  • Integrated true-centering key supports precise, secure installation.
  • Full-length wear tiles protect the underside of the arms and support sweeping applications.
  • Cylinder bumper and cover shield hydraulic lines and cylinders from impact and debris.
  • Metallic cylinder wiper rings help prevent foreign material from entering the cylinders.
  • Valve guard protects hydraulic components positioned behind the frame.
  • High- and low-pressure hydraulic configurations for matching the attachment to the lift truck hydraulic system.
  • Basic, integral sideshifting and external sideshifting configurations.
  • Independent arm control.
  • Round bar, serrated rib and button-style arm facings.
  • Special wide-opening ranges for single-pass, full-width truck loading.
  • Factory-installed load backrest.
  • Quick-disconnect mounting kit.
  • Reverse valve configuration and non-sideshifting models available by request.
  • High-visibility frame design gives the operator a clearer view through the attachment.
  • Equal arm movement supports predictable positioning around the load.
  • Efficient hydraulic system is designed to minimize energy consumption while maintaining clamp performance.
  • Sideshift circuit relief supports controlled sideshift speed and performance.
  • 40J, 53J and 67J models feature a high-flow regenerative valve with pressure relief for clamp, sideshift and backhand functions.
  • Capacities extend from 3,500 lb at a 24-inch load center to 11,000 lb at a 31.5-inch load center, depending on model.
  • Cataloged nominal opening ranges extend from 16.9 to 123.3 inches, depending on the selected configuration.
  • Top-mounted hydraulic cartridges and a test port provide convenient access for adjustment and service.
  • Lubrication-free bearings eliminate routine bearing lubrication requirements.
  • Protected hydraulic components help reduce exposure to recycling debris and impact damage.
  • Recycling facilities and other demanding material-handling operations where debris, ground contact and attachment wear are persistent concerns.

You may also like…