Cascade J-Series Turnaload

3,500–7,000 lb. capacity at a 24-inch load center
Class II, III, and IV mounting
28.1 – 91 in. nominal opening range
360° continuous rotation
48 in. tine length

Documents

Product Documents

Videos

Cascade J-Series Sliding Arm Clamps

Attachment Resources

The Cascade TURNALOAD™ is a rotating forklift attachment designed to transfer loads between pallets, invert products, rotate and separate bales, and dump bins or tote boxes. With continuous 360° rotation and capacities from 3,500 to 7,000 lb, TURNALOAD attachments provide a versatile solution for applications where loads need to be rotated or transferred without extensive manual handling.

TURNALOAD clamps are built to order to accommodate application-specific requirements, including pallet size, pallet material and construction, load dimensions, packaging, opening range, and arm size. Fixed or hydraulic side stabilizers are also available for applications involving bagged products, slick materials, or other loads that may shift during rotation.

Model Numbers: 35D-TAL | 50D-TAL | 70D-TAL | 18j-TAL-2A-0220 | 26J-TAL-3A-0230

Continuous 360° rotation.
Bottom arm shutoff standard.
TURNALOAD clamps are built to order based on application requirements.
Available with application-specific pallet size, pallet material, load dimensions, opening range, and arm configurations.
Models available with capacities of 3,500, 5,100, and 7,000 lb at a 24-inch load center.
Class II, III, and IV mounting configurations available depending on model.
48-inch tines are standard on the catalog configurations shown.

Fixed side stabilizers.
Hydraulic side stabilizers.
Top arm shutoff.
Both arms movable.
Quick-disconnect mounting.
Alternate clamp sizes.
Alternate opening ranges.
Alternate degrees of rotation.
Alternate arm sizes.
Application-specific non-catalog configurations.

Hydraulic clamping and rotation reduce the need to manually reposition or invert loads.
360° rotation allows operators to manipulate loads from the lift truck.
Pallet-to-pallet load transfer can reduce manual product handling in applications using captive or dedicated pallets.

Bottom arm shutoff is standard, with top arm shutoff or both arms movable available depending on application requirements.
Fixed or hydraulic side stabilizers are available for bagged products, slick materials, and other loads that may shift during rotation.
Application-specific configurations help match the attachment to the load, pallet, and packaging being handled.
Cascade recommends consultation for applications requiring side stabilizers or non-standard configurations.

Capacity range: 3,500–7,000 lb at a 24-inch load center.
Continuous 360° rotation.
Published opening ranges extend from 28.1 to 91.0 inches, depending on model.
Available for Class II, III, and IV mounting.
Catalog models include 1.5 x 5 x 48-inch and 2 x 5 x 48-inch tines on 18J and 26J configurations.
70D configurations use 2 x 6 x 48-inch tines.
Catalog tine spacing is 34 inches OTO on the 18J configuration and 35 inches OTO on the 26J and 70D configurations.
Multiple variations in clamp size, opening range, degree of rotation, and arm size are available.

Built-to-order construction allows the attachment to be configured around the intended application.
Quick-disconnect mounting is available to simplify attachment installation and removal.
Multiple catalog and non-catalog configurations allow attachment specifications to be matched to lift truck and load requirements.

Warehousing and distribution.
Manufacturing.
Pallet transfer operations.
Captive pallet systems.
Product inversion applications.
Bale handling and separation.
Bagged product handling.
Bin and tote dumping.
Applications involving slick or shifting loads when equipped with appropriate side stabilizers.