Conger Industries Inc. - Wisconsin's Material Handling Experts

We help businesses move material at peak efficiency with the right equipment & solutions

You are here: Home / Equipment / Forklift Attachments / Cascade J-Series Razorback Clamps
Banner-Slider-J-RazorBack

Cascade J-Series Razorback Clamps

  • 1,950–2,000 lb. capacity
  • Class II mounting
  • 19.1–82.8 in. nominal opening range
  • 41.3 in. frame width
  • 32.4 in. hook spread

 

Request a Quote

Documents

Product Documents

Videos

Attachment Resources

The Cascade J-Series Razorback Carton Clamp is designed to handle large case loads where space between products is limited. Its thin, tapered, non-articulating arms knife between tightly packed loads in trailers, containers, and storage areas, while layered arm construction provides flex without sacrificing a slim profile.

Capacities range from 1,950 to 2,000 lb, with multiple opening ranges and arm configurations available to fit the application. High frame visibility, integrated sideshift, equal arm movement, and rubber-faced aluminum contact pads support precise, secure load handling. Top-mounted hydraulic components and lubrication-free UHMW bearings simplify routine service requirements.

Model Series: 9J-CRS-2A

  • Thin, non-articulating arms knife between tightly spaced case loads in trailers, containers, and stacked storage areas.
  • Layered “razorback” arm construction combines a slim profile with controlled arm flex.
  • Open-frame design provides clear visibility through the attachment.
  • Rubber-faced aluminum contact pads help maintain secure contact with large case loads.
  • High-strength steel frame and steel castings.
  • Lubrication-free, full-length UHMW bearings.
  • Flow divider for equal arm movement.
  • Integrated sideshift circuit with sideshift relief.
  • True centering key for precise, secure attachment installation.
  • Clamp and backhand hydraulic protection.
  • Top-mounted hydraulic cartridges and test port.
  • Custom opening ranges and frame widths.
  • Custom arm lengths, arm heights, and pad surfaces.
  • Application-specific contact pad sizes and surfaces.
  • Pallet strips on the contact pads for pallet handling.
  • Frame bumper for added protection when handling loose loads.
  • Independent arm control.
  • Regenerative valve for faster arm movement on low-flow electric trucks.
  • External sideshift.
  • Class III, quick-disconnect, and other ISO mounting configurations.
  • Alternate valve configurations for left- or right-hand hydraulic installation.
  • Bolt-on top load backrest.
  • Clamp and backhand protection is built into the hydraulic system.
  • Rubber-faced contact pads provide secure engagement with case loads.
  • Flow divider promotes equal arm movement during clamping.
  • True centering key supports precise and secure mounting on the lift truck.
  • Model capacities range from 1,950 to 2,000 lb.
  • Available opening ranges extend from approximately 19.1 to 82.8 inches, depending on configuration.
  • Efficient hydraulic system is designed to reduce energy demand while maintaining attachment performance.
  • Sideshift circuit relief helps optimize sideshift speed and operation.
  • Low- and high-pressure configurations are available to match the lift truck hydraulic system.
  • Top-mounted hydraulic cartridges and a test port provide convenient access for adjustment and diagnostics.
  • Full-length UHMW bearings operate without routine lubrication.
  • The attachment can be converted to non-sideshifting operation by plugging the appropriate valve ports.
  • Warehousing and distribution operations handling large case loads.
  • Trailer and container loading or unloading applications.
  • Facilities where tightly stacked loads leave limited room for arm entry.

You may also like…